Cosari ProGlide 900

Features

Even Radial Grip, Sealed Spin

The polypropylene core slides over five contoured wires and seats flush against a sealed end bearing. The cover locks in place, stays round and spins freely without creeping off the end.

• 3 Washable PP-Core Covers in the Box

  Rotate covers between coats or colors. Polypropylene cores stay perfectly round even after a 48-hour soak.

• Zero Railroad Edge Tracks

  Five wires and a stiff shank keep pressure even across the full nine inches, so both edges lay down the same film.

• 3-Minute Rinse, Many Rooms of Reuse

  Microfiber releases latex fast under warm water and springs back without matting, ready for the next room.

• 5-Wire Sealed Bearing Cage

  Five spring-tempered wires grip the core evenly while sealed nylon/acetal bearings keep latex out of the spin. Silent, smooth and skid-free coat after coat.

• Zero-Flex Chrome Shank

  An 8.0mm solid chrome-plated steel shank holds its shape under pole pressure, so you get even edges and no ropes or dry streaks.

• Reinforced Universal Pole Thread

  A steel ferrule wraps standard 3/4-inch ACME threads so the handle won't crack or spin loose when you lean into a ceiling.

How to use it

1. 1

   Slide On a Cover

   Push a microfiber cover onto the 5-wire cage until it seats flush. No tape prep. Thread on an extension pole if you're doing ceilings or tall walls.

2. 2

   Glide, Then Rinse

   Roll long floor-to-ceiling passes for a smooth, lint-free finish. When you're done, rinse the cover in about three minutes and it's ready for the next room.