Cosari VacLock™ N52 Dual-Axis Alloy Mount

Features

The base pulls a vacuum

Turning the collar lifts the center of the TPE diaphragm and pulls air out from under it. Outside air pressure then pins the base to the surface. No glue is involved, so heat can't soften it.

The magnets do the gripping

Twenty N52 magnets sit in a ring behind a non-slip silicone face. They line up with MagSafe iPhones or the included metal rings, so the phone locks in portrait or horizontal orientation with one tap.

The arm keeps it steady

A short two-link alloy arm keeps the phone close to the base, which cuts down on bounce. The damped hinges hold any angle and fold flat to 18mm when you park.

• MagSafe + Universal Android Ready

  Works out of the box with MagSafe iPhones, and the included metal rings bring the same hold to any Android phone or case.

• 20 × N52 Magnetic Hold

  Twenty N52 neodymium magnets give 2,400g (5.3 lbs) of vertical hold. A heavy phone in a thick case snaps on with a solid clack and stays there over potholes.

• 65 kPa Dry Vacuum Lock

  Press the base down and twist the knurled collar 90°. The ratchet draws the air out for up to 18 lbs of suction on glass, gloss trim, or the included foundation disc.

• 360° Ratchet Swivel

  The base rotates a full circle in small, firm clicks. Turn the screen to your passenger, then click it back without loosening anything.

How to use it

1. 1

   Place & twist

   Wipe the spot, press the base down (on the foundation disc if your dash is textured), and turn the collar 90° clockwise until it clicks tight.

2. 2

   Unfold & angle

   Raise the alloy arm to eye level and swivel the head toward your seat. The hinges hold wherever you leave them.

3. 3

   Tap & drive

   Bring the back of your phone to the magnetic ring. It locks on in portrait or horizontal orientation, one hand, no clamps.