Cosari MotoLock Pro

Features

Silicone pillars absorb the buzz

The phone cradle rests on four silicone shock pillars instead of bolting straight to the base. Engine vibration is soaked up in the silicone, so the phone's stabilization hardware is spared.

A lever, not a strap

Dial the width to your phone once. From then on, the rear cam lever clamps all eight corner claws in a single flip and releases just as fast.

• Steadier screen, safer camera

  Silicone isolation flattens engine vibration, keeping maps readable and camera hardware protected.

• Fits nearly every bike

  Three shims and a mirror-stem adapter cover 7/8 in, 1 in and 1-1/4 in bars.

• Stays on your bike

  A recessed hex security bolt replaces the hand knob thieves can spin off.

• 4-Point Camera Shield

  Four silicone pillars float the cradle above the base, absorbing about 92% of 18–160 Hz engine buzz before it reaches your phone's camera.

• 1-Second Cam Lock

  Set the width once. After that, drop the phone in and flip the rear lever to lock it, gloves on.

• Your Case, Your Buttons

  Corner-only claws fit cases up to 16 mm thick and leave the side buttons and bottom charging port completely free.

How to use it

1. 1

   Clamp it to your bars

   Fit the shim that matches your handlebar and tighten the clamp with the included hex key.

2. 2

   Set the width, flip the lever

   Dial the claws to your phone and case once. Drop the phone in and flip the rear lever to lock it.

3. 3

   Angle it and ride

   Rotate to vertical or horizontal, plug in your charger and set your route before you head out.