
Put the seal to the test
I left standing water against this strip on our warm bathroom vanity for three days to test it. The folded edge and peel-and-stick backing held tight, and I found zero moisture underneath when I checked.
Seal the Corner. Skip the Caulk Gun.

A matte white PVC strip that folds into your tub, vanity, or toilet-base corner, peels off its liner with one.
Claim 50% Off — Order NowIn Stock – Free 5–7 Day US Shipping

Four details that decide whether a strip stays down or curls up after a week of showers.
A 0.8mm crease down the center lets the strip fold into the joint on its own, so both wings sit flat and the seal stays centered.
Pinch the tab and pull. The liner comes off in one piece, with no fingernail picking and no wasted strip.
In our test, water pooled against the seam for 72 hours left zero dye or moisture underneath.
Household scissors cut a crisp 45° angle, so inside corners meet flush without stretching the strip.

The strip comes off the roll flat and folds along its central crease into a clean L-shape that matches the corner, so it doesn't bow out or pull away at the bend.

Pinch the light-blue starter tab and peel. The backing releases cleanly from the high-tack adhesive, so you can feed and press the strip in one smooth motion.

Once pressed down, the matte PVC surface sheds splashes and the sealed edges keep water from getting behind the counter or tub.

Limited-Time Direct Offer — Save 50% Today
Architectural PVC Sealing Strip with a Pre-Scored 90° Crease
Backed by our 30-Day Money-Back Trial & Full Cosari Guarantee.
$44.99 $89.99 Free Tracked Shipping (5–7 Days) Included
In Stock: Delivers in 5–7 Business Days. Free insured US delivery with tracking.
30-Day Money-Back Guarantee plus a full 2-Year Warranty.
Quantity
What it's for: Tub-to-wall joints, vanity backsplashes, kitchen sink edges, and toilet bases, anywhere old caulk has cracked, stained, or started holding water.
What makes it different: A pre-scored central crease for 90° corners, a light-blue starter tab on the liner, and a matte white PVC finish that looks like cured silicone instead of shiny tape.
How to get the best seal: Remove loose old caulk, wipe with rubbing alcohol, let the surface dry fully, warm the strip briefly with a hairdryer, then press firmly along both wings and the crease.
Free 5–7 Day US Shipping: Every order ships free with full tracking and delivers in 5 to 7 business days.
30-Day Trial: Try it at home for 30 days risk-free. Need help? Email us anytime at support@buycosari.com.
2-Year Warranty: If anything goes wrong within 2 years, we replace it free of charge or refund your order in full.

A 1.8mm matte PVC shield on top and a high-tack butyl-acrylic adhesive underneath keep water out and the edges down.
No 24-hour wait and no taped-off shower. Press it down and the bathroom is back in use.
The low-sheen matte surface reads like a fresh silicone bead, so the joint looks finished, not patched.
Cosari CornerGuard 90Standard Competitors
| Feature | Cosari CornerGuard 90 | Standard Competitors |
|---|---|---|
| Fit into a 90° corner | Folds on its pre-scored crease | Flat tape you force into the joint |
| Remove the backing | One pull on the blue starter tab | Pick at the liner with a fingernail |
| Time before use | Immediately | Up to 24 hours for silicone to cure |
| Look when installed | Matte white, like cured silicone | Glossy, reads as plastic tape |
| Tools needed | Scissors and rubbing alcohol | Caulk gun, scraper, painter's tape, spirits |

Swipe left for steps 2 and 3

After cleaning and drying the joint, pinch the starter tab and peel back the first few inches of liner.

Seat the crease in the joint and press both wings firmly as you unroll along the seam.

Cut flush at the end with scissors, or at 45° for inside corners. The sink or shower is ready right away.

I left standing water against this strip on our warm bathroom vanity for three days to test it. The folded edge and peel-and-stick backing held tight, and I found zero moisture underneath when I checked.

I'm honestly too tired to tackle a full recaulk with a caulk gun and scraping tool. The blue starter tab was a lifesaver, and I sealed the counter and tub edge in minutes. The matte white looks nice, too.
I use this along the gap under our kitchen tile backsplash, and it's pretty great at keeping water and crumbs out. The smooth white strip is easy to wipe down after dinner.
Our kids splash water everywhere at bath time. I put this along the bathroom counter, and the center crease hugs the wall-to-counter corner nicely. So far it's kept the splashes from getting into that gap.
No peel-and-stick strip is magic if you don't prep the surface first. I cleaned and dried the area well, and this was easy to apply. The smooth matte white surface wipes clean without much fuss.
I like that it has a crease down the middle for folding into the corner, and the blue tab made the backing easy to start. Worth it so our bathroom doesn't look so dingy with that old discolored grout showing.
I installed this around the base of our bathroom sink over a year ago and pressed it down firmly as I went. The matte white strip is still holding strong, with no edges peeling up.
This strip looks fantastic! The matte white blends right in with our light gray and beige bathroom tile and marble-look counter. The whole corner looks much tidier now.
I used this to freshen up the dated counter corner in my rental kitchen. It was easy to cut mitered pieces for the 90-degree wall junction, and I didn't have to wait 24 hours for silicone to cure.
I warmed the roll slightly with a hairdryer before installing it, then used the blue tab to peel back the liner. The flexible crease molded tightly along the tile and grout lines. Take your time pressing it down.
$44.99 $89.99 Free Tracked Shipping (5–7 Days) Included
In Stock – Free 5–7 Day US Shipping · 30-Day Risk-Free Trial.
Each roll is 38mm (1.5 in) wide, 1.8mm thick, and 3.2m (10.5 ft) long, enough for a typical vanity backsplash plus one tub edge.
Cut each piece at a 45° angle with scissors so the two ends meet flush. Stretching one continuous piece around the corner can cause it to lift over time.
Remove any loose or crumbling caulk first, clean with rubbing alcohol, and let the area dry completely. Warming the strip briefly with a hairdryer helps it press into grout lines.
Right away. There's nothing to cure, so once the strip is pressed down firmly along both wings and the crease, it's ready.
It's a peel-and-stick PVC strip with no liquid sealant, so there's no solvent smell during installation and no curing fumes afterward.
Yes. Warm the strip gently with a hairdryer to soften the adhesive and peel it back slowly at a low angle. Any light residue wipes off with rubbing alcohol.