Four details that fix the problems light-line anglers complain about most.
5.3 oz Balance
At 151 grams, it sits right on your index finger at the foregrip of a 5- to 7-foot ultralight rod. No tip-dive, no tired wrist after a morning of jigging.
Chamfered Long-Cast Lip
A 45-degree beveled CNC aluminum spool lip lets fine line peel off with almost no friction. We averaged 47 feet with an unweighted 1/64 oz jig.
Sealed 8.8 lb Carbon Drag
Three woven carbon washers sit under a gasket-sealed cap. The drag starts smoothly on 2 lb test, even after the reel takes a dip in the creek.
Direct Screw-In Handle
The CNC aluminum handle threads straight into the drive gear. No hex shaft, no click, no back-play when you twitch jigs on slack line.
How the CreekLite Keeps Light Line Under Control
Line Leaves the Spool Cleanly
The chamfered lip and flat, pre-shimmed line lay let 2 lb line come off in smooth coils instead of loose loops, so you get distance without wind knots.
Water Stays Out of the Drag
A rubber O-ring under the drag cap seals the carbon washer stack. Splash, rain, or a full dunk won't turn your drag jerky.
Handle Locks Metal to Metal
The handle screws directly into the gear hub, so every turn goes straight to the rotor. You feel every tick of a jig with nothing loose in between.
After fishing, rinse the reel with a light spray of fresh water, shake it off, and let it air-dry with the drag backed off. Don't blast it with a hose or soak it.
Once a season, add one drop of reel oil to the line roller and handle knob. Store it in the pouch with the drag loose so the carbon washers stay flat.
Backed by our 30-Day Money-Back Guarantee & Full Cosari Warranty
Customer Support: support@buycosari.com
Rigged and Fishing in 3 Steps
Swipe left for steps 2 and 3
1
Mount the Reel
Slide the reel foot into your rod seat, tighten the hood, and thread the handle onto your preferred side. It takes about five seconds.
2
Spool Your Line
Tie braid or mono straight onto the knurled band. No tape, no backing. Wind on with light tension for flat, even lay.
3
Start Casting
Tie on a 1/64 oz jig, open the bail, and flick it out. The chamfered lip does the rest.
Your Next Creek Morning Deserves a Reel That Doesn't Tangle
$64.99$129.99 Free Tracked Shipping (5–7 Days) Included
In Stock – Free 5–7 Day US Shipping · 30-Day Risk-Free Trial.
Frequently Asked Questions
Is the handle left/right interchangeable?
Yes. The CNC aluminum handle is a direct screw-in design that swaps sides in about 12 seconds. There's no loose end cap to lose in the grass.
How much line does it hold?
About 190 yards of 2 lb, 140 yards of 4 lb, or 105 yards of 6 lb mono, with no backing needed.
Will braid slip on the aluminum spool?
No. The spool has a machined knurled band that grips 4 to 8 lb braid directly, so you don't need electrical tape or mono backing.
Is the drag felt or carbon?
It's a gasket-sealed stack of three woven carbon fiber washers, rated up to 8.8 lbs, with very low startup resistance on light line.
Can I use it in saltwater?
It handles brackish and light inshore splash thanks to shielded stainless bearings and a sealed drag cap. Rinse it with fresh water after every salty trip.
What if I don't like it?
You get a 30-day money-back guarantee. Fish it, and if it isn't right for you, send it back for a full refund. It's also covered by a 2-year warranty.
